Toronto & GTA's Fuse Box to Breaker Conversion Specialists
⭐⭐⭐⭐⭐ 5.0 on Google (500+ reviews) · 4.9/5 on HomeStars (338 reviews) · HomeStars Best of the Best 2023
ESA Licensed • 500+ Reviews • Since 1972
Replace outdated fuse boxes and unsafe Federal Pioneer Stab-Lok panels that insurers refuse with modern, insurance-compliant breaker panels — permits, Hydro coordination, and clean installation handled end to end.
Services: Fuse box conversions • Stab-Lok replacements • 100A & 200A upgrades • Insurance-compliant • Same-day installation
- ESA Licensed
- 500+ Five-Star Google Reviews
- 50+ Years in the GTA
- 99% First-Pass ESA Inspection
- Complete Coordination Start to Finish
- Same-Day Installation Possible
Request Service or Assessment
Response Within 1 Hour. Premium Service.
Fuse Boxes Replaced With Modern Breaker Panels
We remove outdated fuse boxes and install modern breaker panels with proper grounding, bonding and labelled circuits — clearing insurance issues and making your home safe for today's electrical loads. ESA permit and inspection included.
The Three Questions Fuse Box Owners Ask Us
“My fuses still work — why replace them?”
Fuses protect wire, not people, and a 60A fuse panel can't carry a modern kitchen, A/C and EV load. Most insurers now surcharge or refuse coverage on fuse panels — the conversion removes both the fire risk and the insurance problem.
“Will my power be off all day?”
A typical fuse box to breaker conversion is a single-day job. Power is off only for the cutover window — usually 4 to 6 hours — and we book the Hydro disconnect and ESA inspection so nothing drags into a second day.
“Do I need the permit and inspection, or can we skip it?”
Every panel change in Ontario legally requires an ESA permit and inspection. We pull the permit under our ECRA/ESA licence, meet the inspector on site, and hand you the certificate your insurer and future buyer will ask for.
What Your Home Looks Like After the Conversion
A Labelled Breaker Panel
Every circuit mapped, labelled and inspected — no more guessing at fuses.
Safe, Modern Connections
Damaged or undersized feeds corrected while the panel is open.
Old Hazards Found Early
We flag knob-and-tube and aluminum runs before they become a claim.
⭐⭐⭐⭐⭐ Trusted by GTA homeowners with 500+ five-star Google reviews.
Modern Breakers for a Safer, Insurable Home
Fuse boxes and Federal Pioneer Stab-Lok panels were never designed for today's electrical loads. They trip unreliably, fail under fault, and are routinely refused by Ontario home insurers.
Tron Electrical has replaced thousands of GTA fuse boxes and unsafe panels since 1972 — ESA permitted, Hydro coordinated, and finished clean.
Complete coordination from quote to ESA inspection. We handle the full process start to finish — permits, Hydro coordination, installation, and final inspection — so homeowners never have to manage utility steps, paperwork, or inspection scheduling themselves.
Complete Fuse Box Conversion Services
Fuse Box Replacement
Convert outdated screw-in fuse boxes to modern breaker panels with proper grounding and bonding.
Federal Pioneer Stab-Lok Removal
Replace unsafe Stab-Lok panels that insurers refuse with insurance-compliant Eaton, Siemens, or Square D panels.
60A → 100A / 200A Upgrades
Increase service capacity for modern appliances, HVAC, EV chargers, and heat pumps.
Insurance Compliance Conversions
Resolve insurer non-renewal or surcharge issues with a certified modern panel and ESA paperwork.
Older Home Specialists
Forest Hill, Rosedale, Leaside, Kleinburg and other heritage neighbourhoods — clean work in finished spaces.
Condo & Light-Commercial Conversions
Older condos, duplexes, and small commercial spaces with outdated fused service.
Why GTA Homeowners Choose Tron for Fuse Box Conversions
- ESA Licensed
- 500+ five-star Google reviews
- Serving Toronto & the GTA since 1972 — family-owned, ESA licensed, insured, and trusted by 500+ five-star reviewers.
- Thousands of fuse boxes and unsafe panels replaced since 1972
- ESA permit & Hydro coordination handled
- Same-day conversion possible
- Eaton, Siemens & Square D panels
- Written one-year workmanship warranty
Old Fuse Box vs. Tron Electrical Conversion
If your panel shows any of these warning signs, it's time to convert — before it becomes an emergency or an insurance problem.
Warning Signs
- Screw-in fuses or 60A service
- Federal Pioneer Stab-Lok or other unsafe panel brands
- Frequent blown fuses or warm/discoloured panel cover
- Difficulty sourcing replacement fuses
- Insurance refusal, non-renewal or surcharge
- Can't safely add modern appliances or EV chargers
EV Charger and Load-Capacity Assessment
An EV charger panel upgrade is not always necessary. Homeowners can request an hourly electricity-consumption report from their Hydro utility. We review this information with an electrical load calculation to determine whether:
- the existing 100A electrical service has sufficient capacity;
- an EV energy-management system can avoid a service upgrade; or
- a full 100 amp to 200 amp panel upgrade is required.
A subpanel adds breaker space but does not increase the total electrical capacity available to the home.
We also replace outdated fuse panels, Federal Pioneer and Stab-Lok electrical panels, and coordinate Toronto Hydro disconnect and reconnect requirements, ESA permits and inspections.
Real Fuse Box Conversion Work Across Toronto & the GTA
From heritage homes to insurance-driven upgrades, Tron Electrical handles fuse box removal, Stab-Lok replacement, ESA permitting, Hydro coordination, installation, and final inspection from start to finish.
A Clean Fuse Box Conversion From Quote to ESA Certificate
- 1
Request service or book an assessment — flat, transparent pricing
- 2
On-site quote of fuse box, mast, and grounding
- 3
ESA permit filed & Hydro disconnect coordinated
- 4
Same-day fuse box removal & modern breaker panel install
- 5
ESA final inspection & certificate for insurance and resale
Designed for Older Homes, Heritage Properties & Insurance Renewals
Whether you're clearing an insurance issue, modernizing a 1950s bungalow, or prepping for a renovation, Tron Electrical handles your fuse box conversion end to end.
Fuse Box Conversions Across Toronto, Vaughan & the GTA
We convert fuse boxes and replace Stab-Lok panels across Toronto, Vaughan, Oakville, Mississauga, Richmond Hill, Markham, Thornhill, Kleinburg, King City and surrounding GTA communities.
Ready for a Safe, Insurance-Compliant Breaker Panel?
Call Tron Electrical & Automation for a transparent quote, ESA permit, and clean same-day fuse box conversion. We handle the full process from start to finish — you never coordinate permits, Hydro steps, or ESA inspection requirements yourself.
- ESA Licensed
- 500+ Five-Star Google Reviews
- 50+ Years in the GTA
- 99% First-Pass ESA Inspection
- Complete Coordination Start to Finish
- Same-Day Installation Possible